MandaManda

for fan motors

Fliters

Mesh Grease Filters

Primary use

  • To reduce the amount of grease in the air stream

Construction

  • Channel frames
  • Interwoven expanded mesh between rigid frame edges, and supplied with drain holes

Please contact the M&A Cleaners sales team to discuss your specific requirements

Kitchen Extract Grease Filters

M&A Cleaners supply two main types of kitchen canopy grease filters: baffle and mesh. They are both designed for use in commercial kitchens and can be supplied in a range of sizes with frames made from stainless steel, aluminium or galvanised sheet steel.

Baffle Grease Filters

Primary use

  • To reduce the amount of grease in the air stream and the risk of the spread of fire into the ductwork

Construction

  • Channel frames
  • Overlapping blades to force grease from the air to drip down into a collection tray via drain holes

KE 50-25-4 Rectangular fan

Art no: 27767

 

  • Swing-out
  • Speed-controllable
  • Integral thermal contacts
  • Can be installed in any position
  • Maintenance-free and reliable

 

The KE models have impellers with forward-curved blades and external rotor motors. The motor and impeller are mounted on the access cover to facilitate easy maintenance. The casing is manufactured from galvanised sheet steel. To protect the motor from overheating the fans have integral thermal contacts with external leads for connection to a motor protection device. The fans can be installed in any position and are easy to connect using the DS flexible connections. The KE fans have a pre-wired, integral terminal box.

Axial Fans

Alco supply a wide range of fans, speed controllers and auxiliaries to suit all your extraction and ventilation requirements.

The AW range of plate axial fans and AR range of cased axial fans are based around the Ziehl-Abegg external rotor motor and an aerodynamically designed impeller to provide a very compact, efficient unit. This range incorporates sickle bladed impellers to give better overall performance.

Key features are:-

  • Diecast aluminium blades with low noise sickle blade design
  • Maintenance free, sealed-for-life bearings
  • Insulation class ‘F’ and IP54 protection
  • Operating range of -40°C to 60°C or 70°C
  • TK thermal protection
  • 100% speed controllable motor
  • Inlet guard

AW fans include-

  • Pressed galvanised steel wall plate incorporating full bellmouth.
  • Inlet Guard

EW fans include-

  • Galvanised steel casing incorporating a flange at either end.

N.B. These fans are not recommended for reverse operation

Please call to discuss your specific requirements.

50JM/20/4/6/32/1PH LONG CASED AXIAL FLOW EXTRACT FAN

 

The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials.

We think this product is the World’s best axial fan, and our recommended number one choice for every, industrial and commercial application

The build quality and reliability are the highest we have ever experienced with fans still running since the range was introduced in the early 1990’s

Every time you fit this fan you know you’ve made the right choice, and it will enhance your reputation for only using the best quality products

Supplied fully assembled

Fully speed controllable

Can be used in any none hazardous environment (also available for hazardous application on request)

Suitable in temperatures from -40°C to 50°C (70°C in some instances, please ask for details)

Low to high air volumes

Low to high static pressures

Available sizes 315mm – 710mm from stock

800mm – 1000mm made to order, ring for availability

1000mm + ring for availability

The Casings are spun sheet steel, then hot dipped galvanised to give a finish highly resistant to corrosion and can be mounted external and internal

The impeller (the bit that goes around and moves the air) is manufactured die cast aluminium

The motors are totally enclosed with class F insulation with protection to IP55.

50JM.BIF (200)/20/4/6//32 3PH

 

Another great fan from FlaktWoods, Bifurcated (sometines shortened to Bifs or Bif Fans) are inline axial flow fans where the motor has been taken out of the airstream. This allows the fan to operate at higher temperatures.

Available sizes 400mm – 630mm from stock
800mm and 1000mm ring for availability
The Casings are spun sheet steel, then hot dipped galvanised to give a finish highly resistant to corrosion and can be mounted external and internal
The impeller (the bit that goes around and moves the air) is manufactured die cast aluminium
The motors are totally enclosed with class F insulation with protection to IP55.
The fans can be installed horizontal or vertical
They can be run upto 200Deg Continuos temperature
All suitable for speed control via inverter

63JM/20/4/6/20/3PH LONG CASED AXIAL FLOW EXTRACT FAN

 

The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials.

We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application

The build quality and reliability are the highest we have ever experienced with fans still running since the range was introduced in the early 1990’s

Every time you fit this fan you know you’ve made the right choice, it will enhance your reputation for only using the best quality products

Supplied fully assembled

Fully speed controllable

Can be used in any non hazardous environment (also available for hazardous application on request)

Suitable in temperatures from -40°C to 50°C (70°C in some instances, please ask for details)

Low to high air volumes

Low to high static pressures

Available sizes 315mm – 710mm from stock

800mm – 1000mm made to order, ring for availability

1000mm + check for availability

The Casings are spun sheet steel, then hot dipped galvanised to give a finish highly resistant to corrosion and can be mounted external and internal

The impeller (the bit that goes around and moves the air) is manufactured die cast aluminium

The motors are totally enclosed with class F insulation with protection to IP55.

45JM/16/4/5/40/1PH LONG CASED AXIAL FLOW EXTRACT FAN

The Flakt Woods JM axial flow extract fan range of cost effective highest quality long cased axials.

We think this product is the World’s best axial fan, and our recommended number one choice for every industrial and commercial application

The build quality and reliability are the highest we have ever experienced with fans still running since the range was introduced in the early 1990’s

Every time you fit this fan you know you’ve made the right choice, it will enhance your reputation for only using the best quality products

  • Supplied fully assembled
  • Fully speed controllable
  • Can be used in any non hazardous environment (also available for hazardous application on request)
  • Suitable in temperatures from -40°C to 50°C (70°C in some instances, please ask for details)
  • Low to high air volumes
  • Low to high static pressures
  • Available sizes 315mm – 710mm from stock
  • 800mm – 1000mm made to order, ring for availability
  • 1000mm + check for availability
  • The Casings are spun sheet steel, then hot dipped galvanised to give a finish highly resistant to corrosion and can be mounted external and internal
  • The impeller (the bit that goes around and moves the air) is manufactured die cast aluminium
  • The motors are totally enclosed with class F insulation with protection to IP55.

REB16 fan speed controller

The REB range of electronic fan speed controllers manufactured by Solar & Palau. This range of fan speed controllers can be used with any Fan / Motor which is single phase – 240 volts and speed controllable using either 2 or 3 wire control (+earth).

  • REB1 suitable for a maximum full load of 1 amp

Helios High Temp Gigabox – 1 ph – GBW 400/4 T120

Specification:

 

GBW 400/4 T120 model:

Max Air Volume : 1319 l/s
Noise :  40 dB(A)
Watts :  540 W
R.P.M :1280

 

Helios GBW High Temp Single Phase Fan Overview:
For up to 120 deg C these are powerful box fans offering for high volumes and high pressure. A fully speed controllable boxed backward curved centrifugal fan range suitable for indoor or outdoor use rated IP54 able to handle cooking grease and other airborne pollutants. Motor out of the high temperature airstream.

Application:
400 mm fans suitable airflow temperatures up to 120 deg C for ventilating spaces with high ambient air temperatures. Offering good volumes even with long duct runs. Can be used with the flow option of one or two side outlets. Applications including commercial kitchens, workshops and factories etc.

Main Features:
– Complete with 400 mm circular duct connections and flexible connections..
– Fully speed controllable
– High performance up to 1.319 m3/s.
– Powerful backward curved centrifugal fan ideal for high temp ambient applications.
– 1 Year no quibble warranty
– Quality assured by the manufacturer ISO9001

Helios GBW 400 T120 Dimensions:
Duct Diameter : 400 mm
Length : 670 mm
Weight :62.0 KG

Resources:
Installation Instructions – click here
Wiring Diagram – click here
Catalogue Pages – click here

Helios Code:
GBW 400/4 T120 High Temp

1 2